| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,090 Posts1,056,016 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2000 Posts: 5,212 'Bolter | | 'Bolter Joined: Feb 2000 Posts: 5,212 | Any Chevrolet bell housing will fit, so you have a wide choice of transmissions. No change to the crank will be needed. Spec the flex plate to the same tooth count as the flywheel so the starter fits assuming the starter bolts to the engine. Some used a three bolt starter that fit the trans housing. I believe the common 168 tooth flex plate is standard, 153 is the small diameter one.
The 700r4 is a big heavy trans that works great, for a lighter 4 speed you can use a 200r4 which is based off the T350.
Joe | | |
|
|
| |
