| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,203 Posts1,057,412 Members48,471 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | MMMmmm, if you bought the emergency brake cable one end of it has a "bracket" that bolts to the back side of the backing plate and the other end will go to and through an "arm" that is riveted to the side of the chassis and has one bolt through it to hold it from moving....then the very end of the emergency brake cable will fasten to a "bracket" that goes on the outside end of the emergency brake cross member and a bolt goes throught that bracket to hold it to the crossmember while the cable is put through the bracket so you can adjust it....Whew!!
Like the other bolters suggest. Get a shop manual, or use the one on line, and also a factory assembly manual. Good luck. | | |
|
|
| |
