The Stovebolt Site Forums The Shop Area Engine Shop 216 with 235 Crank

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

6 members (Jon G, baldeagle, RLB, frogfarmer, ndkid275, Hush), 74 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,087

Posts1,055,974

Members48,430

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 216 with 235 Crank atomarc #543281 06/03/2009 10:19 PM
Joined: Dec 2006 Posts: 1,464 ID W waldo53 Shop Shark
waldo53 Shop Shark W Joined: Dec 2006 Posts: 1,464 ID	Maybe someone else with more experience with the 216 than I have will chime in - but I'm thinking the 216 block isn't cast or drilled so that it would be "full pressure" even though a 235 crank was used.

Entire Thread
Subject	Posted By	Posted
216 with 235 Crank	Frank50	06/03/2009 8:47 PM
Re: 216 with 235 Crank	atomarc	06/03/2009 9:56 PM
Re: 216 with 235 Crank	waldo53	06/03/2009 10:19 PM
Re: 216 with 235 Crank	tclederman	06/03/2009 10:34 PM
Re: 216 with 235 Crank	tclederman	06/04/2009 12:41 AM
Re: 216 with 235 Crank	Pre '68 Dave	06/04/2009 12:51 AM
Re: 216 with 235 Crank	tclederman	06/04/2009 2:50 AM
Re: 216 with 235 Crank	JiMerit Boltr#43	06/04/2009 3:44 AM
Re: 216 with 235 Crank	Pre '68 Dave	06/04/2009 4:48 AM
Re: 216 with 235 Crank	JiMerit Boltr#43	06/04/2009 3:35 PM
Re: 216 with 235 Crank	Frank50	06/04/2009 7:17 PM
Re: 216 with 235 Crank	Raph	04/30/2022 6:09 AM
Re: 216 with 235 Crank	Phak1	04/30/2022 1:08 PM
Re: 216 with 235 Crank	Frank50	05/03/2022 6:51 PM
Re: 216 with 235 Crank	Hotrod Lincoln	05/03/2022 7:30 PM
Re: 216 with 235 Crank	Hotrod Lincoln	05/03/2022 9:42 PM
Re: 216 with 235 Crank	Hotrod Lincoln	05/04/2022 7:45 PM
Re: 216 with 235 Crank	Hotrod Lincoln	05/04/2022 7:47 PM
Re: 216 with 235 Crank	Hotrod Lincoln	05/04/2022 9:29 PM
Re: 216 with 235 Crank	Frank50	05/05/2022 3:55 PM
Re: 216 with 235 Crank	Raph	05/06/2022 2:10 PM
Re: 216 with 235 Crank	moparguy	05/07/2022 11:05 AM
Re: 216 with 235 Crank	Hotrod Lincoln	05/07/2022 9:20 PM
Re: 216 with 235 Crank	Raph	04/15/2024 7:38 PM
Re: 216 with 235 Crank	Hotrod Lincoln	04/15/2024 8:20 PM
Re: 216 with 235 Crank	Raph	04/17/2024 4:24 PM
Re: 216 with 235 Crank	Raph	04/17/2024 6:34 PM
Re: 216 with 235 Crank	Hotrod Lincoln	04/17/2024 6:47 PM
Re: 216 with 235 Crank	Raph	04/18/2024 7:28 PM
Re: 216 with 235 Crank	Hotrod Lincoln	04/19/2024 4:15 PM
Re: 216 with 235 Crank	Raph	04/20/2024 6:50 AM
Re: 216 with 235 Crank	Raph	11/01/2025 8:25 AM
Re: 216 with 235 Crank	Hotrod Lincoln	04/20/2024 11:59 PM
Re: 216 with 235 Crank	Hotrod Lincoln	04/21/2024 3:01 PM
Re: 216 with 235 Crank	Raph	04/21/2024 3:24 PM
Re: 216 with 235 Crank	Raph	05/05/2024 7:58 AM
Re: 216 with 235 Crank	Hotrod Lincoln	05/08/2024 4:52 PM
Re: 216 with 235 Crank	Gdads51	05/08/2024 5:04 PM
Re: 216 with 235 Crank	Raph	05/16/2024 8:00 PM
Re: 216 with 235 Crank	Otto Skorzeny	05/17/2024 11:30 PM
Re: 216 with 235 Crank	klhansen	11/01/2025 5:12 PM
Re: 216 with 235 Crank	Hotrod Lincoln	11/01/2025 8:20 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard