| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,060 Posts1,055,832 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | Welcome to the Bolt and as Leo says its nice to have another Panel man on board.
You may want to cut the little access doors out as they are available and then you can spray the back side of the bolts with penetrating oil and let them soak.
You may want to weld a washer to them so you can get a grip on them and twist them out?!
I can tell you right now, even with those little plates off you do not have a lot of room to work and get to the inside. I just put some sound deadener in my doors and man was it a pain.....if you do this don't go side to side.....put it top to bottom. It always takes one way to figure another is best.
Good luck on the screws and as Leo says, post in the correct forum and you will get more responses.
| | |
|
|
| |
