I’ve got one side higher than the other. My thought is work the high side down while watching that the low side stays constant.

Just wondering if you agree.

Also attached a picture of my jig. 3/8”x5”x5”. Used all thread then bolted in place with a nut on top and bottom and a lock washer.
Attachments
IMG_2309.jpeg (197.91 KB, 208 downloads)
IMG_2308.jpeg (238.82 KB, 206 downloads)

Last edited by ChevyDarren; 11/19/2023 4:03 PM.
Darren
Current Project - 1950 3100 5 Window with a rebuilt 216 and 3 speed trans