Crawling underneath today I removed the starter which is not connected to the Bellhousing. I don’t know if the pictures I took will help anyone much but what it appears to me.. There is a bolt near the top of the bell housing connecting it to the engine. It’s very tight & im not sure how I can get it off? That leaves me to leave the Bell Housing on the engine & at least separate the transmission from the Bell Housing? To me I see one large bolt on each upper side. I think that would allow it to separate. The clutch lever looks like it would have to be disconnected too?
1953 Chevy 153A 3/4-ton Working on my project since 2015 Follow along in my DITY
