| |
Click on image for the lowdown. 
====
| | |
1 members (klhansen),
129
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,151 Posts1,056,997 Members48,460 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | Not familiar with your exact problem but I think my 52 panel is about the same.
Question....did you pull the vent window glass out of its frame and put new tape in it?? If so, maybe you pushed the glass back into its frame to far???
I had a similar problem but I also did my vent glass....and when I put the vent glass back into the frame I closed the vent window and then "pulled back/out" on the vent glass a little to make it snug with the vertical seal without compromising the seal of the vent glass its self.
Note: I had tried a steele seal on another AD, before my panel, and was not impressed with it or the cost. I ordered the ones for the panel from Classic Parts and have never looked back and that was 5 years ago.....just saying! | | |
|
|
| |
