OK I found a place that carries new and used parts locally. Here is there website for anyone looking for parts www.workhorsesupply.com

Grigg after speaking to the guys at workhorse I've got a new question. They have told me that the p30 step van had two version. One with 16" wheels and one setup with 19.5" wheels. The differences are the tie rod is different between the two and the 16"uses a one piece rotor and hub where the 1.5 uses a separate rotor

Do you have any input on this. I'd like to do this swap with the 19.5 setup. Will it all still work and do you know which tie rod you used.

Last edited by Grigg; 11/19/2015 5:17 PM. Reason: add info from duplicate post