Those should be all any shop needs to bend up a set of pipes.
I've seen Ben Pearson benders in a lot of shops, but I think
any bender could use the numbers.
A big thanks to Lem for sharing those with us.
I think the only difference in the tail pipe years is where
it exits at the rear, which is an easy adjustment to make
if you want to change that.
Might need a little adjustment in that tale pipe for us 3/4
ton guys also, since we're about 10" longer in the bed.
Now...those mufflers!!! I talked with Walker Exhaust Systems
a few years back about re-instating the AD pipes and muffler
in their catalog but they weren't interested. I guess manufacturing
them in quantities less than a quarter million isn't profitable enough.
One of the guys here posted that he had a company in Canada
custom make one for his truck. To bad we can't get that
company to make a small production run. I think if they were
accurate reproductions they would sell quite readily. It's
really a pretty simple muffler to make. I've even thought
about trying one my self, but I've got enough projects in
the works right now.
Tim, did your muffler from the guy on ebay come in a box, that
is, with any part numbers or names on it?
DG
Last edited by Denny Graham; 10/21/2015 10:50 AM.
