The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (WICruiser, dwreills, 78buckshot, Shardean), 93 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,042
Posts1,055,516
Members48,424
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#90877 05/11/2003 7:42 PM
Joined: Mar 2003
Posts: 19
H
Junior Member
Junior Member
H Offline
Joined: Mar 2003
Posts: 19
I've just tried installing an aftermarket turn signal kit on my '53 1/2 Ton. The signals work great until I turn on either the parking lamps or the lights. When I pull the light switch on, the signals switch off. What did I do wrong?

#90878 05/11/2003 8:00 PM
Joined: Jun 2000
Posts: 52
P
Member
Member
P Offline
Joined: Jun 2000
Posts: 52
Where did you get the kit? Thanks!

#90879 05/11/2003 8:28 PM
Joined: Mar 2003
Posts: 19
H
Junior Member
Junior Member
H Offline
Joined: Mar 2003
Posts: 19
I picked it up from Chevy Duty, PN#53-551, it is supposed to wire directly into their wiring harness. I'm sure it does but I probably crossed the wires somewhere.

#90880 05/11/2003 9:19 PM
Joined: Jul 2002
Posts: 385
H
'Bolter
'Bolter
H Offline
Joined: Jul 2002
Posts: 385
Redundant ground wires are your friends. wink It sounds like the power is being shunted off the signal switch when the headlights are on; perhaps you selected the wrong tab on the headlight switch to tap the signals? If all else fails, you may want to run a dedicated hot lead off the ignition switch to isolate the turn signals.


1955 First Series GMC 250 1-Ton Panel
In the Gallery
Mr. Hedgehog - Follow the build
If you can't laugh at yourself, I'll laugh at you.
#90881 05/12/2003 2:33 AM
Joined: Mar 2003
Posts: 19
H
Junior Member
Junior Member
H Offline
Joined: Mar 2003
Posts: 19
Thanks a bunch, I found the problem. I was running the signal wires to the smaller contact line. The lights were working but I couldn't tell because the other filament was drowning them out.


Moderated by  Jon G, Rusty Rod 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0