The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?

Wrenching this Labor Day
Plenty of places to share.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
5 members (Peggy M, CuzzFuzz, lumbersawyer, baldeagle, frogfarmer), 26 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,005
Posts1,055,260
Members48,418
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#8367 07/31/2004 10:58 PM
Joined: Jan 2004
Posts: 30
H
Junior Member
Junior Member
H Offline
Joined: Jan 2004
Posts: 30
i cleaned out the varnished fuel from gas lines, tank and fuel filter on my 46 1 1/2 ton and now i get no fuel from the tank. all the lines are dry and i can blow air into tank. do i need to prime the gas lines? the pump worked before i cleaned everything out. i can find nothing in a search. any ideas

#8368 08/01/2004 1:42 AM
Joined: Dec 2003
Posts: 975
4
Shop Shark
Shop Shark
4 Offline
Joined: Dec 2003
Posts: 975
Take off the fuel pump and work it by hand...does it sound like it is working? Your local Napa should have a fuel pump for cheap. That might fix your problem.

starting simple...is the valve under the tank open?

Does gas run from the tank to the pump when gas is installed in the tank? If yes...then is pump....

#8369 08/01/2004 3:09 AM
Joined: Feb 2000
Posts: 985
B
'Bolter
'Bolter
B Offline
Joined: Feb 2000
Posts: 985
I replaced my pump a year or so ago for less then $20.00.

How long did the pump sit while you cleaned the tank and lines. If it was a while the diaphram may have dried out and cracked.

Disconect the output to the carb and place you finger over the fitting. Keep clear of all moving parts and have someone crank the engine. You should be able to tell if you are pushing any air. Or you could just remove the fuel line at the carb and put it(the fuel line) into a clear bottle and crank.

Do you have the fuel filter in the right direction? Is the shut off valve open? Do you have pleanty of gas in the tank?

Good luck


Brian Moore
1949 3100 5 window Deluxe
"Today is better than yesterday, but not as good as tomorrow"
#8370 08/01/2004 3:29 AM
Joined: Jan 2004
Posts: 30
H
Junior Member
Junior Member
H Offline
Joined: Jan 2004
Posts: 30
there is a couple of gallons of gas in the tank. the pump sat a week or so without gas in it but the glass bowl was on. when the gas line is unhooked there is no gas coming out. i blew air into line and heard bubbling in the gas tank. it seems like the gas line dips low and comes up higher to get to fuel tank. do i need more fuel in tank?


Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0