| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,006 Posts1,055,272 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#83421 09/26/2007 12:47 AM | Joined: Dec 2002 Posts: 571 Shop Shark | | Shop Shark Joined: Dec 2002 Posts: 571 | I have a 235 with a pair of 964S Carter YF carbs on an Edmund's Intake. One of the carbs is pulling about 16 hg and just 4 hg in the other. I fiddled with the mixture and idle scew adjustments without much change. Any thoughts? Thanks in advance.  | | |
#83422 09/26/2007 3:09 AM | Joined: Nov 2002 Posts: 2,763 Carburetion specialist | | Carburetion specialist Joined: Nov 2002 Posts: 2,763 | Either the carbs have not been properly synchronized, are you have some major valve problems; probably the former.
Jon.
Good carburetion is fuelish hot airThe most expensive carburetor is the wrong one you attempt to modify. If you truly believe "one size fits all," try walking a mile in your spouse's shoes!The Carburetor Shop | | |
#83423 09/27/2007 1:15 PM | Joined: Dec 2002 Posts: 571 Shop Shark | | Shop Shark Joined: Dec 2002 Posts: 571 | One of the carbs had a throttle plate that was not properly installed (a little catywampus). I straightened it out and synched the carbs up with no problems. Runs great now. | | |
|
|
| |
