The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
2 members (carbking, RLB), 157 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,080
Posts1,055,954
Members48,430
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#831377 03/01/2012 11:40 PM
Joined: Oct 2005
Posts: 408
W
Shop Shark
Shop Shark
W Offline
Joined: Oct 2005
Posts: 408
1977 chevy stepside. I swapped out the 305 and original 400th trans and put in a 350 350th trans. ( BE CLEAR I HAVE NEVER DONE THIS MUCH BY MYSELF BEFORE) engine runs great trans shifts smooth but wont gear down. I put on an edlebrock performer intake and a holley 900 4 bbl carb. I had to add a bracket for the throttle cable and trans cable that came with the carb kit. do i need to adjust the trans cable or am i missing something?? any and all suggestuons welcome. Paul

Joined: Mar 2004
Posts: 3,068
'Bolter
'Bolter
Joined: Mar 2004
Posts: 3,068
The cable should be pulled all the way out when the throttle is wide open. That's the adjustment for the kick down cable. Also be sure you have a vacuum source for the modulator,
Scott


Scott Ward

2 1948 1.5-ton Loadmasters
The red one and The snow pusher
1 1950 3100
1 1955.1 Chevy 6500
1 1954 Chevy 6500 2-Ton
1 1955 1st Series COE 5700
1 1963 K20 (454)
1 1964 C10 (350)
1 1951 1.5-ton Dump Truck
1953 and a 1956 Ford F800

Raising a teenager is like trying to nail Jello to a tree!
Joined: Feb 2004
Posts: 29,780
H
Kettle Custodian (pot stirrer)
Kettle Custodian (pot stirrer)
H Offline
Joined: Feb 2004
Posts: 29,780
The only function of the cable on a 350 is for kickdown. Just as the throttle reaches wide open, the cable should reach its full travel. Shift points on a 350 are controlled by the modulator and the governor pressure, which is generated by the speed of the driveshaft. Adjust the kickdown cable to be full forward at wide open throttle and it should function. If it doesn't, there is an internal problem with the kickdown band and/or the servo that applies it. That's overhaul territory!
Jerry


"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!

Moderated by  Fibonachu, KCMongo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0