| |
Click on image for the lowdown. 
====
|
| |
7 members (Joe H, JW51, Millenimech, dt235sd, Eisenholtz, klhansen, Ponchogl),
109
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,051 Posts1,055,764 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| | | Joined: Sep 2011 Posts: 57 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2011 Posts: 57 | I am in the process of painting the door panels of my 46'. Before I stripped them I noticed a wear line on the lower portion of the panel. Is there some type of seal that is missing to keep the paint from wearing a line on my newly painted panels.
I've noticed this on other trucks for sale as well. Thank you. | | | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | ...if it is like my 37, and it sounds like it is, there is a rubber strip that attaches to the lower section of the cab and goes against the door when it shuts and seals it.
...just as info. My door panels were so beat up I covered them with some thin foam and fabric. When I closed the door the rubber strip let a "mark" on the fabric and it also caused the door to bulge just a little. I knew my doors did not, and have not, shut the best since I did the truck. So, I ended up taking a razor blade and just cutting/trimming the cotton picking rubber seal off. The doors shut better then! | | |
|
|
| |
