The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
7 members (jay d, Bill Hanlon, RaNfLaS, GMCJammer51, DadsFirstPickup, Tyler Watts, Steelonsteel), 94 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,048
Posts1,055,663
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#767304 08/01/2011 1:30 AM
Joined: Jul 2011
Posts: 16
N
New Guy
New Guy
N Offline
Joined: Jul 2011
Posts: 16
Earlier today my truck stalled, I discovered that there was no gas getting to the carb. Took apart the fuel pump and found that one of the check valve diaphragms was unseated. Put it back together and it ran. Took off again and now and hour later I'm on the side of the road. Took it apart again, check valve is in place, put it back together and nothin. Any ideas? I'm stuck here with nothin but a screwdriver! (235 engine, 61 C10)

Joined: Nov 2006
Posts: 2,544
D
Shop Shark
Shop Shark
D Offline
Joined: Nov 2006
Posts: 2,544
Do you have fuel coming into the fuel pump? You might have stuff coming from the tank causing problems. If you have fuel coming into the pump and its not pumping that is the problem. If you take the pump off and work the arm in and out you should be able to see if its working. Has the truck been driven regularly or has it been sitting?

Joined: Feb 2001
Posts: 4,095
W
'Bolter
'Bolter
W Offline
Joined: Feb 2001
Posts: 4,095
I had an almost new pump and the diaphragm went bad after a couple years. i think because of the ethanol in fuel. i put an electric pump on as a back up.


Ron, The Computer Greek
I love therefore I am.
1954 3100 Chevy truck
In the Gallery
2017 Buick Encore
See more pix
1960 MGA Roadster Sold 7/18/2017
Joined: Jul 2011
Posts: 16
N
New Guy
New Guy
N Offline
Joined: Jul 2011
Posts: 16
Thanks guys, yeah the truck was sitting for 8 years until a month ago. When I got the fuel pump apart again I saw some small debris inside. I think it was causing the check valves not to seat. Gas comes in but it didnt pump out. I got it to start up and run home. When I got the truck a month ago I pumped the old gas out of the tank, but I didnt take the tank out and drain it and clean it properly. I ned to do that and install an inline fuel filter.


Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0