| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
7 members (kades51, DennisM, Jon G, baldeagle, JW51, 68ironhead, Stovebolt48),
53
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,004 Posts1,055,246 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#72713 02/03/2007 2:45 AM | Joined: Dec 2005 Posts: 103 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2005 Posts: 103 | I am getting ready to mock up my motor & tranny. Should I put the motor mounts over the front cross member or should I get the motor as close to the fire wall as possible then weld the mounts were they line up with the motor. I have a small block & a 700r4 tranny. should the tranny be lower then the floor board. I just have the block for mock up purposes, do I need any thing else on the motor to set the angle. thanks for the help
If it was easy, everybody would be doing it.
| | |
#72714 02/03/2007 4:36 AM | Joined: Feb 2002 Posts: 12,029 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Feb 2002 Posts: 12,029 | what year truck?? I'd try to have the whole drive line to set the angle, the pinion angle's necessary, which relates to the trans
Bill | | |
#72715 02/03/2007 7:02 AM | Joined: Dec 2005 Posts: 103 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2005 Posts: 103 | I have a 41 chevy 3/4 ton special
If it was easy, everybody would be doing it.
| | |
|
|
| |
