The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
3 members (Patina 54, Otto Skorzeny, FAST55), 99 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,034
Posts1,055,440
Members48,422
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#668016 08/05/2010 8:27 PM
Joined: Mar 2010
Posts: 79
J
jmh
Offline
Wrench Fetcher
Wrench Fetcher
J Offline
Joined: Mar 2010
Posts: 79
I had a bad fuel pump on my 235(busted inside or something).Bought a replacement from parts store(Webber brand)but it wont pull the gas from the tank to the carb.I have a new chassis mounted tank,fuel lines,and inline filter going into the carb.When you try and drive the truck you have to keep the choke about half for it to run without stalling.An old gent told me the lobe on the cam could be worn to the point it wont give full travel on the pump lever. Any ideas?

JMH

jmh #668045 08/05/2010 10:49 PM
Joined: Feb 2009
Posts: 400
P
'Bolter
'Bolter
P Offline
Joined: Feb 2009
Posts: 400
Did you do a fuel pump test to see if and how much fuel was being pumped,or checked fuel pressure?


1953 Chevy Two-Ton
In the Stovebolt Gallery
More pix on Photobucket

Be careful calling yourself a expert,because an "EX" is a hasbeen and a"SPERT" is a drip under pressure.

Joined: Sep 2001
Posts: 29,269
Bubba - Curmudgeon
Bubba - Curmudgeon
Joined: Sep 2001
Posts: 29,269

After you have done PapaJ's fuel pump test:

Have you checked for vacuum leaks at your carburetor and intake manifold?

Joined: Mar 2010
Posts: 79
J
jmh
Offline
Wrench Fetcher
Wrench Fetcher
J Offline
Joined: Mar 2010
Posts: 79
Gents,

As far as I know I don't have any vacuum leaks.I do have an exhaust leak at the manifold(bad donut).I have not done a pressure test but it will not keep the see through filter full. Only about one third full.If you pull the line from the carb while the truck is running(crazy I know but I am desperate)there is not much pressure.I am going to try a few other things.May need to rebuild the carb.It sat dry for many years.As always thanks for ideas guys.

JMH

Joined: Jul 2004
Posts: 2,987
R
'Bolter
'Bolter
R Offline
Joined: Jul 2004
Posts: 2,987
If the carb has not been rebuilt, I would definitely try that first.


Rich
1947 Loadmaster
1947 Chev. Loadmaster
1959 Chev. Viking 40

Life is short--eat dessert first!
Joined: Dec 2003
Posts: 1,144
K
'Bolter
'Bolter
K Offline
Joined: Dec 2003
Posts: 1,144
On the 48 John M had replaced the fuel filter with see thru which only shows about a third full, after rebuilding carb replacing fuel line replacingvacum advance assembly and line it runs pretty good, don't go to fast around yard since only have E-brake but it runs fine no spitting and popping on accelration. fuel filter never shows much more than 1/3 full even at high speed no load idle.


Moderated by  69Cuda, Super55 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0