| |
BUSY BOLTERS Are you one?  The Shop Area
continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.
| | Click on image for the lowdown. 
====
| | |
7 members (TUTS 59, DES57, BLUEMEANIE, Peggy M, Waveski, 55shaker, Joe W),
532
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics126,777 Posts1,039,282 Members48,100 | | Most Online2,175
Jul 21st, 2025 | | | | Joined: Mar 2009 Posts: 62 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2009 Posts: 62 | My '56 3600 dually has 17.5 inch budd style wheels held on with standard heavy 1/2 20 flat nuts. I've been looking at these heavy hex stainless steel 18-8 nuts for replacement. http://www.mcmaster.com/#stainless-steel-hex-nuts/=7ce40p.your thoughts? | | | | | Joined: Dec 2003 Posts: 2,733 Shop Shark | | Shop Shark Joined: Dec 2003 Posts: 2,733 | You should have a tapered side wheel nut. I haven't seen these in SS and when I go to the page you reference and use the locater I could only bring up 1/4" size. Replacing a standard hex nut with another makes no sense to me. Use the right parts. Any tire store or auto parts should carry them so get their advice. I don't think the Budd style wheel use anything different. | | | | | Joined: Mar 2009 Posts: 62 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2009 Posts: 62 | Thanks for the reply
these wheels use a standard heavy hex nut, no taper.
I guess the question is would the SS be to soft. | | | | | Joined: Dec 2003 Posts: 2,733 Shop Shark | | Shop Shark Joined: Dec 2003 Posts: 2,733 | Just as with regular steel there are different kinds of SS so it will depend on the material. Again I would recommend a good tire source for this kind of question. | | | | | Joined: Sep 2006 Posts: 2,393 Shop Shark | | Shop Shark Joined: Sep 2006 Posts: 2,393 | Standard stainless steel in strength is equivalent to Grade 2 and would never be used in conjunction with brake or suspension parts,wheels included. Grade 8 stainless is available, but as Dave suggested, it would be a very good idea to talk with a good tire shop.
Drew
| | | | | Joined: Feb 2000 Posts: 4,886 'Bolter | | 'Bolter Joined: Feb 2000 Posts: 4,886 | Any chance you could put a stainless steel cap over the standard nut? Any good truck stop display rack has them.
Joe | | | | | Joined: Mar 2009 Posts: 62 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2009 Posts: 62 | Talked to NAPA and two tire stores and my brother the engineer and the all said it would be ok using 18-8 SS.
One of the tire stores had some for $4.00 ea,just got them from Mc Master for $1.05ea.Very shiny, no need to buff.
The SS caps were $1.94 | | |
|
|
| |
