| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,006 Posts1,055,267 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2008 Posts: 20 New Guy | | New Guy Joined: Feb 2008 Posts: 20 | Does anybody make a patch panel for the roof of the panel trucks. I have a 48 1/2 ton GMC and where the drip rail end above the rear doors. There is a factory seam where the roof and body come together. Mine has rusted through on the passanger side.
Any help Thanks Dave | | | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | I don't think you will find that panel being made. That would have to be made from scratch, I would think. | | | | | Joined: Oct 2004 Posts: 1,780 Master Gabster | | Master Gabster Joined: Oct 2004 Posts: 1,780 | If you are talking about the header piece that the doors close onto, that piece is still around in junk yards, especially in California. I replaced a section of my roof a couple of years ago with a piece I found in a junk yard.
Pictures might help identify the piece you are talking about. Place an ad in the swap meet section, there might be a few guys that have an old panel shell for parts. | | | | | Joined: Feb 2009 Posts: 95 Wrench Fetcher | | Wrench Fetcher Joined: Feb 2009 Posts: 95 | Dave,
You will have to wing it.Look at my photobucket and see mine.
I melted out the lead and made a patch fron a old fender.
Ken Neel may have the corner peices to fix it.1-918-605-2248
Sully
| | | | | Joined: Jan 2009 Posts: 121 'Bolter | | 'Bolter Joined: Jan 2009 Posts: 121 | im gonna be cutting up and parting out a 49' panel,,,,,,only thing is im unsure as to when i will be getting it. i have been waiting on the owner to pull the engine and trans out for about 2 months already and he will not let me take parts off it till he pulls them. i made the mistake of letting him know i was in no hurry so that means he is in no hurry. but if i get it anytime soon ill let you know. | | | | | Joined: Sep 2009 Posts: 34 Apprentice | | Apprentice Joined: Sep 2009 Posts: 34 | im gonna be cutting up and parting out a 49' panel,,,,,,only thing is im unsure as to when i will be getting it. Hmmm can't wait for a list on that, if the roof will be cut up I could use a part of it.(Big nasty dent on my roof) | | | | | Joined: Feb 2008 Posts: 20 New Guy | | New Guy Joined: Feb 2008 Posts: 20 | Thanks for the help. I take a picture and post after XMAS.
MERRY XMAS all you bolters.
Dave | | |
|
|
| |
