| |
Click on image for the lowdown. 
====
| | |
2 members (Joe H, Naturalthud),
196
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,080 Posts1,056,062 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2009 Posts: 33 Apprentice | | Apprentice Joined: Sep 2009 Posts: 33 | This stuf is hard as a rock. I would like to get down to the metal then come back with new pait and under coat in the orginal spots like the factory, but geese thsi stuff is really something | | | | | Joined: Feb 2000 Posts: 769 Shop Shark | | Shop Shark Joined: Feb 2000 Posts: 769 | Electric heat gun will help soften the under coating. | | | | | Joined: Aug 2006 Posts: 237 Shop Shark | | Shop Shark Joined: Aug 2006 Posts: 237 | I have been able to get some off with engine degreaser in the past if you can get it to where it can soak. Then I use a sharp putty knife to scrape it off.
Jesus is Lord! Only through the blood of Jesus are you washed clean of your sins. Come see us... Dad's Chevy Our VideoGod bless you! Michael..
| | | | | Joined: Mar 2007 Posts: 64 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2007 Posts: 64 | I agree, heat gun and scraper. WD-40 will get some of it off too, but you'll need lacquer thinner to clean the WD-40 off. Joe | | | | | Joined: Apr 2005 Posts: 1,971 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 1,971 | If it is on that good, maybe you should leave it on. | | | | | Joined: Oct 2006 Posts: 4,983 Master Gabster | | Master Gabster Joined: Oct 2006 Posts: 4,983 | Leave it on. It will help a little with sound and vibration deadening. I coated my under cab and fenders with bedliner.
~Jim
| | |
|
|
| |
