| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,023 Posts1,055,370 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2006 Posts: 42 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2006 Posts: 42 | Looking for longer bolts or studs so I can mount PS pump on a 235.
I know I could pull one of mine, just not looking to cause any problems. Just looking for the stock length of a head bolt.
Thanks. | | | | | Joined: Aug 2007 Posts: 610 Shop Shark | | Shop Shark Joined: Aug 2007 Posts: 610 | and total length is 3.55" from top to bottom. Length of the threads is 1.06". Diameter is 3/8". For my power steering conversion on my 235 I used bolts from a Jeep inline 6. The overall length is a bit longer so I ended up cutting about a 1/2" off. The thread length came out to be the same and so did the overall length, and a plus was it had a 7/16" stud on top which I used to bolt my upper alternator mount to. More details on my conversion here https://www.stovebolt.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=494191#Post494191 | | | | | Joined: Dec 2006 Posts: 42 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2006 Posts: 42 | Thanks, thats what I needed. | | |
|
|
| |
