The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
3 members (TUTS 59, Hawkman, MrSnerdly), 50 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,043
Posts1,055,615
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#4931 03/11/2004 3:30 AM
Joined: Mar 2004
Posts: 3
S
Junior Member
Junior Member
S Offline
Joined: Mar 2004
Posts: 3
I have an 1988 Gmc p/u. when i turn the ignition on the fuel pump is puming gas up to the injectors, but they aren't shooting gas into the intake before i turn it over. what could be causing this?

#4932 03/11/2004 3:56 AM
Joined: Feb 2002
Posts: 2,893
W
Socket Breaker
Socket Breaker
W Offline
Joined: Feb 2002
Posts: 2,893
no idea, but the guys and gals at

http://www.fullsizechevy.com

could probably help you figure it out.

#4933 03/11/2004 5:44 AM
Joined: Feb 2004
Posts: 29,763
H
Kettle Custodian (pot stirrer)
Kettle Custodian (pot stirrer)
H Offline
Joined: Feb 2004
Posts: 29,763
The injectors trigger from the "crank" signal from the ignition module. Is it getting spark, and do the injectors spray during cranking? If so, it's working like it's supposed to. If it was squirting gas before you crank the engine it would flood. Try a 12 volt test light, to the "tach" terminal of the distributor cap. It should flash rapidly when the engine is cranked. If not, you've either got a bad module or pickup coil in the distributor. In that case, there will also be no spark, along with no spray.
Jerry


"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
#4934 03/12/2004 12:10 AM
Joined: Mar 2004
Posts: 3
S
Junior Member
Junior Member
S Offline
Joined: Mar 2004
Posts: 3
yes it does spray gas into the engine and it does start (after cranking it a while) i juss thought that i remember it spraying a gas for three seconds and then kicking off (like it was a choke) thank you for the help though.

sam

#4935 03/12/2004 3:35 AM
Joined: Jan 2001
Posts: 46
F
Wrench Fetcher
Wrench Fetcher
F Offline
Joined: Jan 2001
Posts: 46
If it cranks over and always eventually starts, I'd check the fuel pump relay on the firewall. If this relay fails, the Control Module senses the fault and provides +12 volts from another source (I believe from the oil pressure sensor, once oil pressure is detected).

#4936 03/13/2004 6:35 AM
Joined: Oct 2003
Posts: 12
D
Member
Member
D Offline
Joined: Oct 2003
Posts: 12
Some gm v8's have a ninth injector that sprays a constant spray of fuel into the manifold only while starting. Maybe it's screwed up?


The shortest distance between two points is probably under construction

Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0