Click on image for the lowdown. 
====
| | | Forums66 Topics128,056 Posts1,055,804 Members48,426 | | Most Online14,466 Apr 26th, 2026 | | AD Chevy Trucks Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down with Ads! Again, thanks! | | | | Joined: Feb 2004 Posts: 336 Shop Shark | | Shop Shark Joined: Feb 2004 Posts: 336 | Well I found a 64 1 ton dually with a 283 and a 4 speed with a propeller shaft brake for $500. Its got some rust areas and it doesn't have a bed, but I have a flatbed for it. It runs very strong and brakes good. It has a higher end rear-end that was scooting pretty fast in third gear. Has a new heater core still in the box. I didn’t see any smoke The guy says he has had lots of people look at it, but nobody wants it because there is no bed.
The way I see it... clean it up slap some paint on the frame do a little body work, put the bed on it, drive it around for a while and sell it for $1,500 or so. Or swap out the 283 and rear-end with my 235 in my 59 and sell the 64 for around $1,500 or so. I think the motor and rear-end would be worth at least $500
Does $500 seem like a good steal? I'm a younger bolter still pretty green. The 64 needs a glove box, cleaning and rust scraping, a bed and other odds and ends.
Come on talk me into it!
Billy | | | | | Joined: Apr 2004 Posts: 158 Shop Shark | | Shop Shark Joined: Apr 2004 Posts: 158 | $500 for a running truck is a pretty good deal, period.
I paid $600 for my '61, knowing that it probably didn't run and would need a frame-up resto.
Brian | | | | | Joined: Feb 2004 Posts: 336 Shop Shark | | Shop Shark Joined: Feb 2004 Posts: 336 | Yea I could register it and put on some temporary tail lights and drive it like it is until I put on the bed. Is their any laws that say you cant drive a truck without the bed? | | | | | Joined: Apr 2004 Posts: 158 Shop Shark | | Shop Shark Joined: Apr 2004 Posts: 158 | That would depend on your state. I believe here in IL, the requirements are bumper, brake lights, turn signals, and reverse lights.
Brian | | | | | Joined: Feb 2000 Posts: 268 Shop Shark | | Shop Shark Joined: Feb 2000 Posts: 268 | If the truck did not have a bed, it don't need one to be driven, but it will need Tail/turn/stop lights, and mud flaps.
A 1 ton would not have a bed, and a pickup bed in most cases will be too short of too long depending on the wheelbase on the truck, a long bed pickup is 127" (8' box), one tons came in 121", 133" & 157". They did make a 1 ton step side pickup on the 133" wheelbase, it had a 9' box and single tires on the rear.
$500 was a vary good deal... | | | | | Joined: Apr 2005 Posts: 196 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2005 Posts: 196 | Get it quick, before someone else does.  Then send us some pics.
66 C10 FS/LB 292/4-spd manual (I also enjoy Hang Gliding) I'm too sexy for my hair, that's why it isn't there
| | | | | Joined: Dec 2002 Posts: 3,440 Moderator - The Electrical Bay | | Moderator - The Electrical Bay Joined: Dec 2002 Posts: 3,440 | where is this truck located?
(diabolical smile)
Another quality post. Real Trucks Rattle HELP! The Paranoids are after me!
| | | | | Joined: Feb 2004 Posts: 336 Shop Shark | | Shop Shark Joined: Feb 2004 Posts: 336 | I'm goanna snag it next week. If its not there then it was not meant to be.
It right over by the rail road track next to the rock and gravel supply yard. | | | | | Joined: Mar 2003 Posts: 181 Shop Shark | | Shop Shark Joined: Mar 2003 Posts: 181 | Why can' tI find those deals here in Virginia?! Any stovebolt truck under a grand is worth buying in my world. | | |
| |