| |
Click on image for the lowdown. 
====
| | |
0 members (),
40
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,030 Posts1,055,428 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2004 Posts: 21 Junior Member | | Junior Member Joined: Dec 2004 Posts: 21 | Hi all. Both window and door handle on each door has a pin drilled into it holding it to the shaft(in addition to the set screw). The shafts have a "groove" not a hole to recieve the pin, I discovered this when I destroyed one of the handles 'cause I could not removw the dam pin! Is the pin a "custom" fix? Any great ideas on removal.
Thanks in advance. | | | | | Joined: Dec 2003 Posts: 2,953 'Bolter | | 'Bolter Joined: Dec 2003 Posts: 2,953 | I think it is a 'custom' fix. I had the same thing on one of my window handles. I removed the set screw and the handle would not come of. Using a bit of leverage the handle popped off breaking the splined shaft on the regulator. There was a nail being used as a pin. My other handles (both trucks) have a pointed set screw, the point goes into the groove in the splined shaft. I also believe that there is another chrome screw which goes in the hole on top of the set screw to either lock it in place or add a finishing touch. I have only seen one like that but am told they are supposed to be there. | | |
|
|
| |
