The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
3 members (Gray_Ghost, LAROKE, Pete1946), 68 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,052
Posts1,055,726
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#165692 03/16/2007 11:48 AM
Joined: Oct 2005
Posts: 31
L
Member
Member
L Offline
Joined: Oct 2005
Posts: 31
Just received my interior kit from Hampton Coach for my 1938 HC. Everything looks pretty straight-forward, except the windlace kit. My truck had no interior except the springs, so I can't even rely on my failing memory. The kit came with four pieces of windlace, the longer two are obviously to install under the moulding around the door openings. The two shorter (44") pieces I suppose go under the moulding around the top of the doors.
The 44" long windlace isn't long enough to door the entire upper half of the door, so where does it start and end? Anyone got a photo they could share?


"You are only young once, but you can ALWAYS be immature!"

1938 Chevrolet H/C 1/2-Ton
#165693 03/19/2007 1:25 AM
Joined: Dec 2003
Posts: 975
4
Shop Shark
Shop Shark
4 Offline
Joined: Dec 2003
Posts: 975
lobo,

Not sure if you got your cab sealed up yet, but if not, the two short pieces (at least on a 46) go between the rocker panel and the cab. The top of my rockers had a little slot for holding the windlace. The doors on my truck even had a little line worn across the bottom of them from the seal rubbing on them all those years.

The long pieces went around the door opening and between the dash and the door frame. The door stops have to be installed before you install the windlace, holddown strips and kick panels.

Again, not sure what goes into a 38 interior vs a 40-46...

#165694 03/19/2007 11:41 AM
Joined: Oct 2005
Posts: 31
L
Member
Member
L Offline
Joined: Oct 2005
Posts: 31
Thanks for the reply. SO, the windland starts at the dash and goes around the door opening? Does any windlace actually mount on the door or is it all installed on the door jamb?? Checked out you photos...NICE '46!


"You are only young once, but you can ALWAYS be immature!"

1938 Chevrolet H/C 1/2-Ton
#165695 03/20/2007 5:36 PM
Joined: Dec 2003
Posts: 975
4
Shop Shark
Shop Shark
4 Offline
Joined: Dec 2003
Posts: 975
lobo,

Back to front might be easier to explain..The windlace starts at the bottom rear of the cab at the door opening, goes up the cab, around the top of the door opening, down the front pillar, around the dash and then down to the bottom of the front of the door opening. On my 46, there is a strip that holds the kick plate and the windlace in place.

The windlace kind of snakes past the dash on my 46...

Hard to explain...

Click on this link and it will show how it goes past the dash. The angle of the pic does not show how it goes past the dash real well, but you should be able to see that is continues on to the bottom of the cab...

pic from the driver side looking to the passenger side

#165696 03/21/2007 11:36 AM
Joined: Oct 2005
Posts: 31
L
Member
Member
L Offline
Joined: Oct 2005
Posts: 31
That answers my question perfectly!! You sir are a gentleman and a scholar (dang few of us left).

Thanks again..


"You are only young once, but you can ALWAYS be immature!"

1938 Chevrolet H/C 1/2-Ton

Moderated by  ndkid275, Phak1 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0