My wife bought me a Vyper shop chair for Christmas that I was looking at online but couldn’t justify spending that much money. I have a cheap HF stool on casters that I went to sit on and it scooted away from me. I fell backwards hitting my tailbone on a concrete floor. Fortunately, I only got a bruised ego and a tailbone that hurt for several weeks. After that my wife decided I needed an upgrade and bought me a Viper chair for Christmas. Made in the USA, Vyper is the Cadillac of shop chairs and I’m looking forward to using it!
Last edited by Phak1; 12/27/20241:35 AM. Reason: Typo
Phil Moderator, The Engine Shop, Interiors and Project Journals
1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes Project Journals Stovebolt Gallery Forum
Nice! I'm on my second HF shop stool after the first one finally died. I had replaced the casters on it, rewelded the top and bottom of the post and the second time I welded on the top of the post, the adjustment mechanism gave up and wouldn't stay extended. It was bad trying to sit on it when it collapses. So the new one was purchased on a recent trip south and sports the casters off the old one which were way more sturdy than the ones supplied with it. So far, so good, but they are a little tippy if not careful.
Kevin 1951 Chevy 3100 work truck Follow this saga in Project Journal Photos 1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car) Busting rust since the mid-60's If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Yeah, I got into the habit of grabbing the seat pad before I sat down. The Vyper has locking casters so I hope that helps.
Last edited by Phak1; 12/27/20241:33 AM. Reason: Typo
Phil Moderator, The Engine Shop, Interiors and Project Journals
1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes Project Journals Stovebolt Gallery Forum
~ Craig 1958 Viking 4400 "The Book of Thor" Read the story in the DITY 1960 Chevrolet C10 "A Family Heirloom" Follow the story in the DITY Gallery '59 Apache 31, 327 V8 (0.030 over), Muncie M20 4 Speed, GM 10 Bolt Rear... long term project (30 years and counting)
If you don't like driving yourTruck, you won't drive yourTruck..| Living life in the SLOW lane
I bought a couple of swiveling seat bar stools for the shop- - - - -but they're about 2 inches too tall. I need to take a sawzall to the legs. I backed up to one and tried to sit down- - - -and it tipped over and dumped me on the floor. I don't bounce as well as I did 30 years ago! Jerry
"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt! There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway Love your enemies and drive 'em nuts!
Big bucks here in the USA too, and shipping to Alaska would probably be a killer. I can buy 10 HF stools for the price of one of these.
Kevin 1951 Chevy 3100 work truck Follow this saga in Project Journal Photos 1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car) Busting rust since the mid-60's If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Phil Moderator, The Engine Shop, Interiors and Project Journals
1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes Project Journals Stovebolt Gallery Forum
Keep on it, Phil -- y'all are bound to click sooner or later.
~ John
A kid raised on Hotwheels, Matchbox and Tonka cannot be reasonably expected to own only one vehicle as an adult.
1949 Chevrolet 3804 In the Legacy Gallery | In the Gallery Forum 1973 IH 1310 Dump 1963 Kaiser M38A1 2001 International/AmTran RE3000 "Skoolie" 2014 Ford E-350 4x4 (Quigley)
Hey ! My wife and kids got me one too!!! It rolls sooooooo nice!
Jeff 1964 Chevrolet K10 Fleetside "A Kid's First Truck" Follow in the DITY 1951 Chevrolet 3100 Follow his build in the Project Journals 1969 Chevrolet Camaro Convertible | 2020 Chevrolet Silverado | 3500 Duramax | 2021 GMC Sierra Denali USAF Veteran 1983-1987 | PSP retired 1990- 2012
I have been eying those chairs for awhile but as others have mentioned they are pricey. My neighbor threw out an old fiberglass office chair with a broken back and I rescued it for the casters and the piston. My HF chair had died like most and thought that I could rob the piston from this chair. In the end I just cut off the back and sanded it smooth. It works awesome, very comfy and rolls pretty good. The price was excellent but the color? Well no will steal it any time soon. The vyper chairs really do look cool and I hope they perform as good as they should for the price point.
1954 GMC Series 1 102-24 Series 1/2 Ton Long Bed 248 to a Hydramatic
Mine opted for the accessory package also. It does work well. Very high quality casters and great finish.
Jeff 1964 Chevrolet K10 Fleetside "A Kid's First Truck" Follow in the DITY 1951 Chevrolet 3100 Follow his build in the Project Journals 1969 Chevrolet Camaro Convertible | 2020 Chevrolet Silverado | 3500 Duramax | 2021 GMC Sierra Denali USAF Veteran 1983-1987 | PSP retired 1990- 2012
Hmmmm- - - - -I believe those cup holders might have an influence on "quality control" around my shop! I have an old Honda Gold Wing disc brake rotor mounted to an office chair base as one of my "sit down and work" devices. Jerry
"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt! There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway Love your enemies and drive 'em nuts!
What is the kidney shaped opening with the slot for?
1950 Chevrolet 3100 (Ol' Roy)
1939 Packard Standard Eight Coupe (The Phantom) | 1956 Cadillac Coupe de Ville (The Bismarck) | 1964 Ford Galaxie 500 coupe |1966 Ford Mustang (Little Red) | 1969 Pontiac GTO (The Dishpit) I 1979 Ford F-100 | 1976 Ford F-150 (Big Red) | 1995 Ford F-150 (Newt)
Jeff 1964 Chevrolet K10 Fleetside "A Kid's First Truck" Follow in the DITY 1951 Chevrolet 3100 Follow his build in the Project Journals 1969 Chevrolet Camaro Convertible | 2020 Chevrolet Silverado | 3500 Duramax | 2021 GMC Sierra Denali USAF Veteran 1983-1987 | PSP retired 1990- 2012
Jerry its suppose to small parts holders. But also works well as a cup holder!!! Plus this chair is just about impossible to tip over.
Jeff 1964 Chevrolet K10 Fleetside "A Kid's First Truck" Follow in the DITY 1951 Chevrolet 3100 Follow his build in the Project Journals 1969 Chevrolet Camaro Convertible | 2020 Chevrolet Silverado | 3500 Duramax | 2021 GMC Sierra Denali USAF Veteran 1983-1987 | PSP retired 1990- 2012
