The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
2 members (Ponchogl, Hush), 67 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,024
Posts1,055,395
Members48,422
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
Joined: Feb 2006
Posts: 45
K
Shop Shark
Shop Shark
K Offline
Joined: Feb 2006
Posts: 45
I am wondering if there is a company that sells the cab steps for my 59 that would sell a superior quality step over any others? I am looking for the steps with the attached rocker panel. Any ideas? Thanks


Ken in NY
Joined: Feb 2002
Posts: 12,029
F
Cruising in the Passing Lane
Cruising in the Passing Lane
F Offline
Joined: Feb 2002
Posts: 12,029
I'd bet that there's only on manufacturer for that 1 piece step/rocker ... I got a set of them from the NAPA up the street, about the same price as the vendors and no shipping ... excellent fit and weight, complete with the attached reinforcement underneath - drivers side freshly installed

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir
"When we tug a single thing on an old truck, we find it falls off" ~ me
Some TF series details & TF heater pics
Joined: Feb 2006
Posts: 45
K
Shop Shark
Shop Shark
K Offline
Joined: Feb 2006
Posts: 45
Bill,
Thanks for the info. Called my local NAPA and nothing. Do you possible have a part number for what you purchased that I could check with NAPA on line? Thanks


Ken in NY
Joined: Feb 2002
Posts: 12,029
F
Cruising in the Passing Lane
Cruising in the Passing Lane
F Offline
Joined: Feb 2002
Posts: 12,029
my number wouldn't help, here the patch panels come thru Cross Canada Body Parts, that NAPA here lists - down there it should be Goodmark Industries, you could ask places if they can get parts from them, or check Goodmarks ordering info link for a distributor nearby - I can testify they have good quality parts ... and they have quite a list of metal parts, most of which I think are made by Dynacorn

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir
"When we tug a single thing on an old truck, we find it falls off" ~ me
Some TF series details & TF heater pics
Joined: Apr 2006
Posts: 453
M
Shop Shark
Shop Shark
M Offline
Joined: Apr 2006
Posts: 453

Joined: Feb 2007
Posts: 9
R
New Guy
New Guy
R Offline
Joined: Feb 2007
Posts: 9
TRY BROTHERS TRUCKS.
BE A LITTLE CAUTIOUS AS I ORDERED ONE FROM A LOCAL PARTS DEALER AND FOUND OUT AFTER I CUT MINE OUT THAT THE INNER VERTICAL PORTION WAS 1" TO SHORT SO I HAD TO MAKE A FILL PIECE TO COMPLETE THE DEAL.
I'VE SEEN THE BROTHERS UNIT INSTALLED IN A MAG WITH WHAT LOOKED LIKE GOOD RESULTS.

GOOD LUCK'
RICH 57

Joined: Feb 2002
Posts: 12,029
F
Cruising in the Passing Lane
Cruising in the Passing Lane
F Offline
Joined: Feb 2002
Posts: 12,029
yes Rich, that vertical panel comes up just to the floor flange, doesn't lap under it as original .... that's why the rule is measure twice, cut once eek grin

OTOH, I always eliminate any lapped joints that need work, they're usually a good part of what cause the rot problem

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir
"When we tug a single thing on an old truck, we find it falls off" ~ me
Some TF series details & TF heater pics
Joined: Aug 2005
Posts: 113
P
Wrench Fetcher
Wrench Fetcher
P Offline
Joined: Aug 2005
Posts: 113
Red58,

I just checked out their website and found that the prices are extremely high. I can get the same parts from Scott's Super Trucks for $15.00 to $100.00 less PER PART! (example: Lower Right Front Fender repair panel: CC - $ 84.91, Scotts - 45.00/ Rear Cab Repair Panel: CC - $ 145.46, Scott's - $ 45.00) The list goes on....

Unless you are willing to pay for the convenience of picking them up locally, instead of having them delivered (Scott's is about an hour south from me). I can save enough money from Scott's to pay for many more parts!

Thanks,

Photo

Joined: Feb 2002
Posts: 12,029
F
Cruising in the Passing Lane
Cruising in the Passing Lane
F Offline
Joined: Feb 2002
Posts: 12,029
Photo - if you're getting stuff for 100 less than Cross Canada, yer comparing apples and oranges! grin and you didn't list the step/rocker combo piece

I paid about 300 for the pair of steps with rockers from NAPA, Scotts list them for 145 each, then I gotta pay freight to here - he has steps without rockers for 45 each .... but then you gotta buy the rocker for 40 and spend 100 of time putting them together - in the US. Goodmark [where CC gets most of their parts] the step/rocker combo is $100

I get stuff from Scotts sometimes, but the freight makes most things more expensive than the Old Car Centre in Langley, who pay for any mailable orders over $50 or so .... and the NAPA here gets most of the Cross Canada parts within 24 hours for about as good a price as either of those

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir
"When we tug a single thing on an old truck, we find it falls off" ~ me
Some TF series details & TF heater pics
Joined: Aug 2005
Posts: 113
P
Wrench Fetcher
Wrench Fetcher
P Offline
Joined: Aug 2005
Posts: 113
Bill,

You're correct in that you'd have to pay freight from Scotts where it's a nice afternoon's drive for me to go and pick them up.

It just may be worth it to go 2 miles to the NAPA here in town and pay the 'extra' $ 3.75 each and save the drive!

Photo

Joined: Feb 2007
Posts: 1
M
New Guy
New Guy
M Offline
Joined: Feb 2007
Posts: 1
Cross Canada is sold through Sherman Associates. You can look up their website at www.shermanparts.com. A lot of professional body shops use them. The price difference is usually based on where the panels are made. Overseas panels are less expensive, but are made from a thinner guage steel. They are all comparably priced. The North American panels are more money, but are a much higher quality part with correct (original) guage steel. They are more money, but worth it in the long run. Their prices are all comparable to each other. You can usually tell the difference by the price. $40-$70 = overseas, $90-up = North America.


Mark Stitt

Moderated by  klhansen 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0