| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,009 Posts1,055,297 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2013 Posts: 1,384 Shop Shark | | Shop Shark Joined: Jan 2013 Posts: 1,384 | Did the 49 COE have a stomp starter? I find no trace of one, however things have been hacked up a bit to fit the 283 into it.
Ignition switch looks original, off - on, no unlock position.
Currently has a starter button in one of the radio knob holes. | | | | | Joined: Apr 2007 Posts: 1,038 'Bolter | | 'Bolter Joined: Apr 2007 Posts: 1,038 | Yes, there was a stomp starter. In the driver's seat, you are sitting much more forward in relation to the engine, compared to a standard cab. Thus, the stomp starter is just forward of the seat base, more or less straight down from your right knee. There will be a reinforced hole in the left floor panel. As you would imagine, the linkage is different than for a standard cab.
Kent | | | | | Joined: Jan 2013 Posts: 1,384 Shop Shark | | Shop Shark Joined: Jan 2013 Posts: 1,384 | Thanks, won't be using it on the new engine, but that takes care of my curiosity. | | |
|
|
| |
