| |
Click on image for the lowdown. 
====
| | |
7 members (TUTS 59, Bill Hanlon, Otto Skorzeny, 50Chevy3100, cmayna, UnclePaddy, 1 invisible),
129
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,042 Posts1,055,509 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2003 Posts: 13 Junior Member | | Junior Member Joined: Oct 2003 Posts: 13 | I'm getting ready to rebuild my wing windows on my 52 chev pickup.
Can you offer any tips on how to remove and replace the glass?
Thanks
Mike | | | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | The shop manual shows you how. | | | | | Joined: Jul 2003 Posts: 141 Member | | Member Joined: Jul 2003 Posts: 141 | I did both of mine a couple of weeks ago and the following worked well:
Removal - soak the edges of the window seal in gasoline, both sides. Let it soak in for about 1 hour, then slowly pry the seal and window out starting at the top corners. Move slowly and just apply constant, but gentle pressure. Then pull the window out with your fingers ... slowly.
Installation - coat the inside of the vent frame with motor oil. I used some available 5W-30. Push the window and seal in the frame and let it set overnight. Trim the seal the next morning.
Good luck.
shoeless | | |
|
|
| |
