Originally Posted by Deve
This is the custom hitch that will accommodate both stock bumper and underbed spare tire carrier.

http://s1312.photobucket.com/user/Deve1958/media/DSC00598_zpse731a8ea.jpg.html

3 Pics. The center tab is where you bolt the center bumper bolt to on the back side. Not hard to make if you have a good square tubing bender which I don't so had to get that part done at the local welding shop.

My current project needs it because when the truck is done, I am making a pickup bed trailer that matches the truck.
Deve, when I first looked at the pictures of you hitch, my knee jerk reaction was that it looked a bit frail. But after thinking about it a while, I concluded that the less than massive design would keep a reasonable person from trying to haul something bigger than they should with these old trucks.
Carl

1952 5-window - return to "as built" condition | 1950 3100 with a 235 and a T-5 transmission