The Stovebolt Site Forums The Parking Lot Tons 'o Fun 1948 1 Ton Dually Complete Brake Overhaul

Hi All,

I am preparing to overhaul the entire brake system on my 1948 Chevy 1 Ton Dually. The VIN is 5 FS-D 1867 (137 in wheelbase). I have perused the forums and seen bits and pieces here and there but I am having trouble formulating a general plan.

First, where do I start? The only thing I have done so far is remove the front wheels and drums and had the shoes relined. The cylinders, springs, etc. are complete dust.

Should I go stainless steel? Is there a kit available for a 1 ton with duallys? If not, do I buy some other kit and modify?

I see a lot of brake parts in the catalogs for ½ and ¾ tons but nothing for 1 ton. I think someone told me previously that the ¾ ton parts can be used?

Many years ago when I started this project, I was planning on having the master cylinder sleeved. Is this still a good idea? And where do I get it done?

What are the special considerations for working with the duallys?

Any assistance or guidance you can provide is very much appreciated! As soon as I get a viable plan together, I’ll start buying parts (hopefully the right ones).

Thanks,
josé