Didn't want to leave this post "hanging" and figure I better but and end to it in case someone reads it and wonders what happened.

Here's how I ended up.
This first picture shows the OEM position.
http://i140.photobucket.com/albums/r19/LutherParris/52Panel/100_1396.jpg

This picture shows where I moved the mirror up. I moved the arm up and drilled another top hole. Look close and you can still see the one I drilled wrong.
http://i140.photobucket.com/albums/r19/LutherParris/52Panel/100_1406.jpg

I have noticed that there are several pictures in the Gallery showing mirrors both ways as shown above.

This is the passenger side mirror in the OEM position. At least I drilled the holes right on this one. The big hole if for a future antena but I may plug it and put the antena where it's suppose to be when we patch the other little hole?
http://i140.photobucket.com/albums/r19/LutherParris/52Panel/100_1405.jpg

Hope this helps someone along the line somewhere.

1937 Chevy Pickup
In the Gallery
1952 Chevy Panel
In the Gallery
More photos
1950 Chevy Coupe
Pictures!

I'd rather walk and carry a Chevy hub cap than ride in a Ferd.
I can explain it to you, but I can't understand it for you smile