| |
Click on image for the lowdown. 
====
| | |
7 members (Shade Baby, Pete1946, frogfarmer, baldeagle, 1955 1 Series, Jon G, 1 invisible),
97
guests, and
8
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,106 Posts1,056,213 Members48,436 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2008 Posts: 176 Shop Shark | | Shop Shark Joined: Jan 2008 Posts: 176 | This the drawing in question? http://www.pbase.com/czechman/image/99395374 It helped me a lot as the last resort to door fitting. I was very careful to go slowly and made a drawing of the hinge before any bending for a comparison as I bent it. Worked like a charm. | | | |
Entire Thread
|  
Door Phase 2, "the clone doors"
| GMCAMARO | 02/10/2011 3:08 PM | |
Re: Door Phase 2, "the clone doors"
| Pete52 | 02/10/2011 3:48 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/10/2011 4:03 PM | |
Re: Door Phase 2, "the clone doors"
| Pete52 | 02/10/2011 6:07 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/10/2011 6:47 PM | |
Re: Door Phase 2, "the clone doors"
| Eileen | 02/10/2011 7:00 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/10/2011 10:19 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/10/2011 11:37 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/11/2011 12:53 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/11/2011 3:06 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/11/2011 4:21 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/11/2011 6:06 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/11/2011 6:23 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/11/2011 8:07 PM | |
Re: Door Phase 2, "the clone doors"
| Czechman | 02/11/2011 9:42 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/16/2011 6:12 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/16/2011 6:48 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/16/2011 7:43 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 03/28/2011 8:58 PM | |
|
|
| |
