| |
Click on image for the lowdown. 
====
| | |
1 members (Eileen),
271
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,101 Posts1,056,181 Members48,436 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2009 Posts: 1,644 Shop Shark | | Shop Shark Joined: Jan 2009 Posts: 1,644 | That problem can be fixed by bending the hinge ,there is a instuction on how to but You'll have to do a search on door hinge heating and bending I had the same problem with my drivers door and fixed it by heating and bending the hinge if the top of the door is good than you'll just have to do the bottom one I think that Czechman has the instuction sheet on his photo album.
Pete | | | |
Entire Thread
|  
Door Phase 2, "the clone doors"
| GMCAMARO | 02/10/2011 3:08 PM | |
Re: Door Phase 2, "the clone doors"
| Pete52 | 02/10/2011 3:48 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/10/2011 4:03 PM | |
Re: Door Phase 2, "the clone doors"
| Pete52 | 02/10/2011 6:07 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/10/2011 6:47 PM | |
Re: Door Phase 2, "the clone doors"
| Eileen | 02/10/2011 7:00 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/10/2011 10:19 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/10/2011 11:37 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/11/2011 12:53 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/11/2011 3:06 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/11/2011 4:21 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/11/2011 6:06 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/11/2011 6:23 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/11/2011 8:07 PM | |
Re: Door Phase 2, "the clone doors"
| Czechman | 02/11/2011 9:42 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/16/2011 6:12 PM | |
Re: Door Phase 2, "the clone doors"
| squeeze | 02/16/2011 6:48 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 02/16/2011 7:43 PM | |
Re: Door Phase 2, "the clone doors"
| GMCAMARO | 03/28/2011 8:58 PM | |
|
|
| |
