Finished my last project; dug out the next one and started in; 1928 Chevy literally in pieces. Three days in, and LOTS of hours. First problem: won't bore you with details, but need a donor frame and found a rolling chassis from a 1950 pickup. It would give me modern brakes, suspension, steering etc. It is the answer. Question: I found the dimensions of a 1950 pickup online and it showed 46 inch width on the frame rails "at the rear" which is not where I need a measurement right now before I pay the money for the rolling chassis (150 miles away so measuring it is not an option right now). Can anybody tell me or direct me to a link where the approximate width is of the frame where the cab would be placed, of a 1950 half ton is located, so I can see if my 1928 cab will be "close" to working on it.
