| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,005 Posts1,055,261 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#47618 07/12/2005 8:38 PM | Joined: May 2005 Posts: 314 Shop Shark | | Shop Shark Joined: May 2005 Posts: 314 | I just read a post about narrowed rears and I didn't want to hijack the thread so I am starting a new one.
I am putting a K5 Blazer frame under a 57 Panel.
The track width on the Blazer front end is about 5-1/2 inches wider than the panel would have been originally. I thought about different backset on the rims, but upon closer inspection it doesn't appear to be a viable option. There is only about 1/8" clearance between the stock rims and the tie rod end. Is there another option that I haven't thought of that would be easier than having the axles and tubes shortened? How much extra space between the outside of the tire and the fender was there originally on a Task Force? Maybe 2-1/4" on each side would be OK? | | |
|
|
| |
