| |
Click on image for the lowdown. 
====
| | |
3 members (Peggy M, Pre '68 Dave, 1 invisible),
101
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,031 Posts1,055,434 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#43758 03/07/2004 2:29 AM | Joined: Mar 2004 Posts: 3,068 'Bolter | | 'Bolter Joined: Mar 2004 Posts: 3,068 | I did a V-8 swap on my '64 but it had side mounts that I reused for the 350. I presume the frames would be the same from a '61 to '64 although the suspension is different. I would find a donor truck in the '63 to '66 era and pull the engine mount towers. Then go to a parts store and get engine mounts for a '66 equipped with a V-8. Put the engine in and mount it to the trans. Put the engine mounts and towers on the engine and lower it to the frame. Center the engine, drill the holes in the frame and bolt it down. I love my new found power. There's no replacement for displacement - good luck | | |
|
|
| |
