When I raise the dump bed on my 3800 to the highest point the diverter valve gets stuck and have to pry it open with force to get it running again, I think it is over filled but at it highest point it only has 1 inch of fluid in the box, so I need to know if there are fluid levels ( one needs to check on the pump which drives the ram to lift the bed? All I am able to see is a breather cap on top of this box-like thing that the PTO is connected to.This device is about a 1 square foot cube, with a small diverter valve on the top of it which has the hydraulic lines(2) and the valve for raising and lowering the bed. Thanks Dutch