The Stovebolt Site Forums The Shop Area Engine Shop King Pin engineering - 1 ton

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

6 members (Gdads51, artinva, Otto Skorzeny, VicZ, klhansen, RAC1812), 49 guests, and 0 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,077

Posts1,055,928

Members48,430

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: King Pin engineering - 1 ton #34230 01/18/2003 6:11 PM
Joined: Feb 2000 Posts: 5,208 Lee's Summit Mo. 64086 J Joe H 'Bolter
Joe H 'Bolter J Joined: Feb 2000 Posts: 5,208 Lee's Summit Mo. 64086	Are the pins themself case hardened, and if you turn them down a little you remove part of the harding? I know the ones I have laying around don't make very good beater bars, they splinter off to easy. Joe 1937 Chevrolet Inline-powered Streetrod

Entire Thread
Subject	Posted By	Posted
King Pin engineering - 1 ton	arnswine...	01/17/2003 10:45 PM
Re: King Pin engineering - 1 ton	T-RUCK	01/18/2003 3:58 AM
Re: King Pin engineering - 1 ton	Steve Lemberg	01/18/2003 5:41 AM
Re: King Pin engineering - 1 ton	Tony	01/18/2003 3:18 PM
Re: King Pin engineering - 1 ton	Joe H	01/18/2003 6:11 PM
Re: King Pin engineering - 1 ton	arnswine...	01/18/2003 6:50 PM
Re: King Pin engineering - 1 ton	Joe Way	01/18/2003 11:55 PM
Re: King Pin engineering - 1 ton	arnswine...	01/19/2003 12:46 AM
Re: King Pin engineering - 1 ton	Anonymous	01/19/2003 1:26 AM
Re: King Pin engineering - 1 ton	arnswine...	01/19/2003 8:21 AM
Re: King Pin engineering - 1 ton	GLPerry	01/19/2003 8:33 AM
Re: King Pin engineering - 1 ton	arnswine...	01/20/2003 8:29 AM
Re: King Pin engineering - 1 ton	Mechainiac	01/20/2003 8:54 AM
Re: King Pin engineering - 1 ton	arnswine...	01/21/2003 6:26 AM
Re: King Pin engineering - 1 ton	arnswine...	01/22/2003 12:42 AM
Re: King Pin engineering - 1 ton	Tony	01/22/2003 11:46 AM
Re: King Pin engineering - 1 ton	Anonymous	01/22/2003 2:57 PM
Re: King Pin engineering - 1 ton	dave s	01/22/2003 4:27 PM
Re: King Pin engineering - 1 ton	arnswine...	01/23/2003 8:49 AM
Re: King Pin engineering - 1 ton	spanky	01/24/2003 12:56 AM
Re: King Pin engineering - 1 ton	spanky	01/24/2003 1:04 AM
Re: King Pin engineering - 1 ton	arnswine...	01/24/2003 1:30 AM
Re: King Pin engineering - 1 ton	ALBERT	01/24/2003 5:11 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard