| |
Click on image for the lowdown. 
====
| | |
0 members (),
68
guests, and
8
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,021 Posts1,055,355 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#27265 07/11/2002 6:29 PM | Joined: Oct 2001 Posts: 3,458 Extreme Gabster | | Extreme Gabster Joined: Oct 2001 Posts: 3,458 | If that's true, than the master cylinder needs adjustment or rebuild. The pushrod needs to be loose enough to let the fluid drain back into the reservoir leaving only 2 psi in the line when the pedal is released. The heat to the brake lines is bad, but it usually causes the brake fluid to boil leaving a lack of fluid, not pressure. Have him adjust the master cylinder pushrod and if that doesn't work the compensator port in the MC is plugged up.
Paint & Body Shop moderator
A lone amateur built the Ark. A large group of professionals built the Titanic. | | |
|
|
| |
