well.

after spending my friday night playing music with some friends in a basement, and a week of classes, i decided to get going on the truck again.

today, was the firewall, as the title indicates.

[img]http://i7.photobucket.com/albums/y297/samwise_/DSCI0002-1.jpg[/img]
after taking the heater off, i discovered a small bit of rust. not alot. only a small bit, but enough to make me want to repair it.

[img]http://i7.photobucket.com/albums/y297/samwise_/DSCI0003.jpg[/img]
patch panels! thank you 1967 C10.

[img]http://i7.photobucket.com/albums/y297/samwise_/DSCI0004-1.jpg[/img]
close enough is good enough, eh?

[img]http://i7.photobucket.com/albums/y297/samwise_/DSCI0006-1.jpg[/img]
rust cut out. new metal in.

[img]http://i7.photobucket.com/albums/y297/samwise_/DSCI0008.jpg[/img]
yay for welding.

[img]http://i7.photobucket.com/albums/y297/samwise_/DSCI0012.jpg[/img]
ew. more rust. and some cut out.

[img]http://i7.photobucket.com/albums/y297/samwise_/DSCI0013-2.jpg[/img]
patch clamped in. i know they're plastic spring clamps. but they came off before they were melted...too bad.

[img]http://i7.photobucket.com/albums/y297/samwise_/DSCI0021.jpg[/img]
primered over.

and. thats about it. took about..3 hours. yeah, i took a while. its okee.

and don't laugh about fluxcore. it works. for the most part...lol.

.later days.
.sam.

1969 K20 , with a '67 front clip. fleetside. 292, 3x1 offy, headers. sm465 4spd. getting put back together, almost ready for paint.
doing it all myself.
19 and lovin' it.

"proper" is so over-rated.

.later days.
.sam.