Winter is Coming
Time to think about winterizing your Bolt.
A good Tech Tip WINTERIZING YOUR TRUCK including a link back to the Forums for additional tips.
Thanks Gdads- I knew about the center head bolt, and no, I did not have that on this engine. All bolts were solid as removed. I can see the square-head plug just below the top center of the pushrod galley (see attached); it seems like the line would connect here, but this plug was in it as I received the engine. I also attached a view of the opposite side showing the tee that goes to the oil filter, and the open end that went to....? Again, this is how I received the engine. I have it set up on a start kart right now, so I can at least watch the oil flow to see if there is another oil passage that isn't visible?? Any suggestions are greatly appreciated! Thanks!
55 GMC 3100 2nd Series 71 GMC 1500 Super Custom 1956 Thriftmaster 1954 Blue Flame 1962 Thriftmaster