DB - The "square-head plug just below the top center of the pushrod galley" in your picture is not the same "port" I described above. If you relook at my pictures of the external oil supply line to the head, it feeds into a port in the head itself, bypassing that plugged port in your block.

Your second picture with the blue circle and arrow (looks like the way you received the engine?) shows the oil filter canister feed line tapped off that oil pressure port T fitting and the "open" port on that would have likely fed the oil pressure gauge line. I can't say from what I'm seeing in your as received picture how the oil feed to the head was at that point.

Just my $.02 worth, but with your engine assembled like it is currently, BEFORE you attempt a full start as it sits, I would suggest you pull the distributor and valve cover, then use a drill with a flat blade style rod to prime/pressurize the oiling system and confirm if you have oil coming up to and dribbling out of the valve rockers.

If no oil present at the rockers doing this, you have to presume that the oil passage in the block to the rocker feed is blocked and you must either correct that internally or add the bypass external oil supply line (like on my engine). If you don't, your top end is going to self destruct from lack of lubrication. frown
Attachments


~ Dan
1951 Chevy 3 window 3100
Follow this story in the DITY Gallery
"My Grandpa Carl's Truck and How it Became Mine"
1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver)
US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)