I built this one from scrap lumber I had and a repurposed set of 4 dolly wheels. Pictures show a GMC 302 deep pan (uses the same pan gasket set as GMC 228, 236, 248, 256 & 270) on the stand.

The larger dolly wheels are both a blessing and a curse. They are good because they roll easier and they are bad because they roll easier when you don't want them to.

I can get you critical measurements if you decide to build your own this way.
Attachments
clipboard01.jpg (290.12 KB, 83 downloads)
Clipboard02.jpg (289.63 KB, 79 downloads)
clipboard03.jpg (214.88 KB, 80 downloads)

Last edited by Bill Hanlon; 08/28/2026 1:49 PM.
'57 GMC 102, Original 347 V8, HydraMatic, 3.08 rear gear, added A/C, disk front brakes, HEI, AFB carb, '98 Honda Black Currant paint. T-boned and totaled 10/12
'52 GMC 152 Stake Bed, Original 228, SM420, added A/C, HEI, disk front brakes, '67 Chev 3.55 rear gear. Gets used as a real truck.