Afternoon. I was able to take some pictures & connect a wire to the electric choke, then remove enough oil. I’ll be looking for advice on adjusting that choke, I’ve never done this one but I’ve done old VW if they’re similar. I’ll be looking for a hot wire to connect the choke. You will see a picture of a screw next to that vacuum that needs a heat source or to be plugged off. The 5th picture was to verify the intake for anyone interested. But I would like to know what the plug is screwed into the head. Looks like a heat sensor it's never been used by me.
Last edited by glennj3; 01/25/202310:44 PM.
1953 Chevy 153A 3/4-ton Working on my project since 2015 Follow along in my DITY
