Man, you guys are so helpful with all of this info! Sorry I have been MIA the past few weeks.

I can give you guys the cam info. I have almost no idea what this stuff means, but this is what the card says (photo of it also attached):

Part #: 12-600-4
SN#: 308997-19

Engine: Camshaft, CS 279T H-107 T Thumper

Valve Adjustment: INTAKE HYD EXHAUST HYD
Gross Valve Lift: .479 .465
Duration @ 279 297
.006 Tappet Lift

Valve Timing OPEN CLOSED
@.006 INT: 36.0 BTDC 63.0 ABDC
EXH: 76.0 BBDC 41.0 ATDC

These specs are for CAM Installed at 102.0 INTAKE CENTER LINE

INTAKE EXHAUST
Duration @ .050 227 241
Lobe Lift: .3190 .3100
Lobe Separation: 107.0


Now that you have the cam info, is there any more info that y'all can offer? Also, I have decided that I'm going with an EFI system instead of the 4 barrel carburetor.

Thank y'all!
Attachments
Comp CAM SHAFT Info.jpg (229.42 KB, 114 downloads)

Last edited by ColbyG; 08/16/2021 7:55 PM.
colby

1952 Chevrolet 3100: Photos
Engine: 219 L6 to 250 L6 to 350 V8
Transmission: Borg Warner T56: 6 Speed (1994 Firebird)

1955 Chevrolet Bel Air
Engine: 265 V8
Transmission: Three Speed
Currently: Rebuilding Engine & Differential

1956 Chevrolet 6400
Engine: 250 L6

1958 Chevrolet Apache 3600
Currently: In Barn

1963 Chevrolet C10 Fleetside
Currently: In Barn