I'm certain power is getting to the switch. The drop down resistor I think the terminal on right of the picture is 12v and the 2 terminal on the left are 6v. I'm not sure how to wire it up and to where. If I really need it. Don't understand if it's important. Can't find any information about the use of it. The wiper switch picture the top terminal is P. The 2 in the middle the left is A the right is B. The bottom is F. Not sure how to wire. Tried a new wiper switch wired hot to B (Battery) terminal and put 1 Yellow wire from wiper motor to H (High) terminal 1 Green wire to L (Low) terminal 1 Black to P (Park) terminal and it doesn't work. When I wire the wiper motor wires to the battery, the Yellow wire is High side. When I put both Green and Yellow wire together to the battery the wiper motor goes to low speed. The Black wire sparks but don't notice any other affect. So I'm assuming Black wire is Park. Wiper switch and 2 speed heater are the only items that aren't working for me after rewire.