The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.
Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
0 members (), 87 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,283
Posts1,058,505
Members48,490
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
Joined: Oct 2020
Posts: 3
L
Moderated
Moderated
L Offline
Joined: Oct 2020
Posts: 3
I have a 1949 3/4 ton Chevy Step Van. I just rewired the whole electrical system, with an updated 12+ hot, 12- ground, spade fuse box. That light up when in use. Everything seems working except heater and wiper switch. The heater has a drop down resistor. Which I have no clue how to wire it. The wiper motor (3 wire, hi, low, & park) works when I connect directly to the battery, without the switch. I bought a new 2 speed wiper switch, thinking the old one was bad. I converted the old switch (B= battery?, A= high?, P= park?, & F= fast or low? letters on back of switch) from bullet connect to male spade connector. New switch has H= high, L= low, P= park & B= Battery letters on the back. I attached pictures. [img]https://www.stovebolt.com/ubbthread...umber/23624/filename/20191021_130225.jpg[/img]
Attachments
Front, Driver side.jpg (272.79 KB, 50 downloads)
Back Rt. 2.jpg (249.09 KB, 51 downloads)
Fuse Box.jpg (132.26 KB, 52 downloads)
Old Wiper Switch.jpg (64.79 KB, 51 downloads)
Dropdown Resistor.jpg (156.29 KB, 48 downloads)

Joined: Mar 2014
Posts: 4,524
J
Moderator, Electrical Bay
Moderator, Electrical Bay
J Offline
Joined: Mar 2014
Posts: 4,524
I can't tell from your drop-down resistor how it was made. Often you will have 12v hot leading in and two 6v hot connections coming out (one for lower current needs...like the radio and one for higher current needs...like the heater motor). My guess is the terminal to the left is 12v+ and each of the two terminals to the right are 6v+, but without seeing it I could only guess which would be higher amp and which would be lower amp.

On your windshield wipers, are you sure you're getting power to the switch? This should be pretty simple if the switch has power. You're comfortable with how the park circuit works, yes?


~ Jon
1952 1/2 ton with 1959 235 | T5 with 3.07 rear end
Joined: Oct 2020
Posts: 3
L
Moderated
Moderated
L Offline
Joined: Oct 2020
Posts: 3
I'm certain power is getting to the switch. The drop down resistor I think the terminal on right of the picture is 12v and the 2 terminal on the left are 6v. I'm not sure how to wire it up and to where. If I really need it. Don't understand if it's important. Can't find any information about the use of it. The wiper switch picture the top terminal is P. The 2 in the middle the left is A the right is B. The bottom is F. Not sure how to wire. Tried a new wiper switch wired hot to B (Battery) terminal and put 1 Yellow wire from wiper motor to H (High) terminal 1 Green wire to L (Low) terminal 1 Black to P (Park) terminal and it doesn't work. When I wire the wiper motor wires to the battery, the Yellow wire is High side. When I put both Green and Yellow wire together to the battery the wiper motor goes to low speed. The Black wire sparks but don't notice any other affect. So I'm assuming Black wire is Park. Wiper switch and 2 speed heater are the only items that aren't working for me after rewire.


Moderated by  Jon G, Rusty Rod 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0