I can't tell from your drop-down resistor how it was made. Often you will have 12v hot leading in and two 6v hot connections coming out (one for lower current needs...like the radio and one for higher current needs...like the heater motor). My guess is the terminal to the left is 12v+ and each of the two terminals to the right are 6v+, but without seeing it I could only guess which would be higher amp and which would be lower amp.

On your windshield wipers, are you sure you're getting power to the switch? This should be pretty simple if the switch has power. You're comfortable with how the park circuit works, yes?


~ Jon
1952 1/2 ton with 1959 235 | T5 with 3.07 rear end