| |
Click on image for the lowdown. 
====
| | |
7 members (Lightholder's Dad, Wickedbass, Christian, NJC, Hotrod Lincoln, baldeagle, 1955 1 Series),
55
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,017 Posts1,055,338 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2006 Posts: 159 Shop Shark | | Shop Shark Joined: Apr 2006 Posts: 159 | Seon it looks like you about have that project wipped.I know the Vortec after market wiring is impossible to get so you are stuck with the rats nest.That is why I steered away from that setup because its not easy.We currently have a Vortec on our Dyno and we did not get the under dash harness. We can run it but we need to see the sensor data to continue.So make sure your OBDII connector is functioning as it was in the truck .You will need it if you have any running issues.Carb would be easy but thats no fun.
In the works 2006 GEN III 6.0 /4L80E/ 205 New process,A/C and power brakes .
| | |
|
|
| |
